Kia Cerato wiper size guide for BD models (2018–2025)
Your Kia Cerato BD needs a 650 mm (26 inch) driver-side blade, a 400 mm (16 inch) passenger-side blade, and a 350 mm (14 inch) rear blade if your model has one. That’s the exact spread for every Cerato BD built from 2018 through to 2025, across both the hatch and the sedan.
- Driver (front left): 650 mm / 26 in
- Passenger (front right): 400 mm / 16 in
- Rear (where fitted): 350 mm / 14 in
Stick with a beam-style or hybrid aero blade for the front pair. It matches the factory profile and handles Australian crosswinds far better than an old-style framed blade.
Key Takeaways
Getting the correct cerato wiper size comes down to three fixed measurements: 650 mm up front on the driver’s side, 400 mm on the passenger side, and 350 mm at the rear where fitted.
| Point | Details |
|---|---|
| Front sizes are fixed | Driver blade is 650 mm (26 in), passenger blade is 400 mm (16 in) across all Cerato BD years. |
| Rear blade varies by body | Hatch models commonly use a 350 mm (14 in) rear blade; many sedans have none. |
| Measure the rubber, not the arm | Always measure tip-to-tip along the rubber edge to confirm size before ordering. |
| Check the connector type | Hook and pin connectors aren’t interchangeable without an adaptor. |
| Com’s selector removes guesswork | The Cerato fitment page matches size and connector automatically, backed by a fitment guarantee, 30-day money-back policy, and 12-month warranty. |
Table of Contents
- What’s the correct cerato wiper size for your model?
- Which wiper blade styles fit the Cerato and which should you choose?
- How do you measure your wiper blades before ordering?
- What connectors and fit issues should Cerato owners watch for?
- How do you install new blades and check they’re working?
- How long do wiper blades actually last?
- Why use a vehicle selector to buy your Cerato blades?
- What conventional advice gets wrong about wiper sizing
- Get the right Cerato blades without the guesswork
- Sources
- FAQ
What’s the correct cerato wiper size for your model?
Every Cerato BD shares the same core sizing, which makes shopping simpler than it is for most cars. The table below sets out the position, length in both units, and the quick notes worth checking before you click “add to cart.”
| Position | Length | Notes |
|---|---|---|
| Driver (front left) | 650 mm / 26 in | Standard across hatch and sedan variants |
| Passenger (front right) | 400 mm / 16 in | Same on both body styles |
| Rear | 350 mm / 14 in | Fitted to hatch models with a rear wiper; sedans typically go without |
Trico’s fitment table for the Cerato BD lists the driver blade as its TF650 and the passenger as its TF400, matching the sizes above. Aftermarket twin-kit listings for the same model line pack the identical 26 inch and 16 inch combination, with a 14 inch rear blade where the vehicle has one. That consistency across sellers is a good sign you’re working with reliable numbers, but always run your rego or model details through a vehicle selector before you pay. Arm hardware can shift slightly between build years even when blade length doesn’t.
Which wiper blade styles fit the Cerato and which should you choose?
The Cerato BD arrived with an aero-style wiper as one of its features, and that shape is still what suits the car best today. Both beam and hybrid blades fit the standard Cerato BD arm without modification, so compatibility isn’t the issue. The real decision is which of the two suits your driving conditions.
- Beam blades run in one solid, curved piece with no exposed frame, giving cleaner sweeps at highway speed and less wind lift on the freeway.
- Hybrid blades add a light aerodynamic cover over a traditional frame, which holds up well under harsh UV exposure and extreme heat.
For most Cerato owners, a hybrid blade is the better all-rounder. It copes with everything from a Brisbane summer to a wet Melbourne winter without the rubber perishing early. Kia’s original wiper feature on the 2018 Cerato leaned on the same aero profile, so you’re not straying from what the manufacturer intended.
Pro Tip: If you park outdoors most of the time, prioritise a blade with UV-stabilised rubber over one that’s simply cheaper per blade. Heat damage kills wiper performance faster than mileage does.
How do you measure your wiper blades before ordering?
Getting the size wrong is the single biggest cause of returns, and it’s avoidable in under five minutes.
- Lift the wiper arm away from the windscreen and lock it in the service position.
- Measure the rubber edge tip-to-tip, not the metal arm or the full assembly length. The rubber is the only part that determines your correct cerato wiper size.
- Round to the nearest size, since blades are sold in fixed increments, not exact millimetres.
- Check the connector on the arm itself, whether it’s a hook, pin, or bayonet style, so you order the right fitting along with the right length.
- Cross-check your model year and body style (hatch or sedan) against a vehicle selector tool before finalising the order.
Skipping step five is where most mistakes happen. Two Cerato BD variants can share a blade length but use a different arm connector depending on the trim level.
What connectors and fit issues should Cerato owners watch for?
Kia Cerato BD arms most commonly use a hook-style connector, though some trims and model years run a pin-type fitting instead. You can usually tell which one you have by looking at the tip of the arm: a hook connector curls around the blade’s spine, while a pin connector slots through a small hole in the adaptor.
- Hook connector: the wiper arm hooks over a bar built into the blade itself, no separate adaptor needed.
- Pin connector: a small pin passes through the blade’s mounting bracket and locks with a clip.
- Universal adaptors: bridge the gap when a blade is designed for multiple connector types, but they add bulk and can introduce a slight wobble if not seated properly.
Watch for these signs after fitting: gaps between the blade and glass at the edges, a chattering noise mid-sweep, or a sweep that doesn’t clear the full windscreen. Any of those point to the wrong length, the wrong connector, or a blade that hasn’t clicked fully into place.
How do you install new blades and check they’re working?
Fitting a new pair takes less time than reading the box.
- Park on level ground, switch the ignition off, and lift both wiper arms into their service position.
- Slide a towel or soft cloth under the arm to protect the glass while you work.
- Release the old blade using the small tab or clip near the connector, then slide it free.
- Line up the new blade’s connector with the arm and push until you hear or feel a solid click.
- Repeat for the second front blade, and for the rear blade if your Cerato has one.
- Lower the arms back onto the glass gently. Don’t let them snap down.
- Run the wipers on a wet windscreen and watch for full-width contact, no chatter, and no missed patches.
Pro Tip: Give the new blades a quick clean with a microfibre cloth before the first sweep. Manufacturing residue on new rubber can cause a squeak that disappears after the first wash.
How long do wiper blades actually last?
Premium blades in mixed climates typically hold up for 12 to 18 months before performance starts to drop off, though heavy UV exposure or frequent sap and dust build-up can shorten that.
- Streaking, skipping, or a faint squeal during operation are the clearest signs it’s time to replace.
- Visible cracking or a rubber edge that’s gone hard and glassy means the blade has already lost most of its sealing ability.
- A monthly wipe-down of both the blade and the glass with a proper glass cleaning method removes the grit that accelerates wear.
- In coastal or high-UV regions, check blades every season rather than waiting for visible failure.
Fitting a blade one size longer than specified to “close a gap” can cause clearance problems at full steering lock or with a roof rack fitted. Stick to the exact length your Cerato calls for.
Why use a vehicle selector to buy your Cerato blades?
Guessing sizes from memory is how most wrong orders happen. A vehicle selector tool matches your model, year, and body style to the correct length and connector automatically, cutting out the manual measuring altogether for buyers who’d rather not lift the wiper arm themselves.
- Enter your Cerato’s details once and get the exact size and connector match, no manual cross-checking required.
- A fitment guarantee backs the result, so if the blade doesn’t seat correctly, it’s covered.
- A 30-day money-back guarantee and a 12-month warranty sit behind every purchase.
- Beam and hybrid options are both available, so you can choose based on how you drive rather than what’s simply in stock.
| Feature | What it means for you |
|---|---|
| Vehicle selector | Matches your exact Cerato variant to the right blade, no guesswork |
| Fitment guarantee | Confidence that the blade you order is the blade that fits |
| 30-day money-back guarantee | Room to return if something’s not right |
| 12-month warranty | Cover against premature wear or defects |
The Cerato-specific wiper range covers both the hybrid and beam styles recommended earlier in this guide, so choosing the right shape is as simple as choosing the selector’s default suggestion or overriding it for your climate.
What conventional advice gets wrong about wiper sizing
Most guides treat wiper sizing as trivia, a number to memorise and move on from. That undersells how much the connector type and body style actually matter once you’re standing in front of your Cerato with a blade in hand. The length is genuinely the easy part; two sellers list the same 650/400/350 spread and they agree because the data is solid, not because it’s a rough estimate.
Where owners actually go wrong is skipping the arm check. A hook connector and a pin connector both exist across Cerato BD trims, and getting the length right while ordering the wrong connector still ends in a return. The conventional advice of “just measure your old blade” is fine as far as it goes, but it assumes your old blade was correct in the first place, which isn’t always true if a previous owner fitted an oversized replacement to close a visual gap.
My take: prioritise the connector check over the length check. Length is standardised and well documented. Fit hardware is where the real variation, and the real returns, come from.
Get the right Cerato blades without the guesswork
Com built its vehicle selector specifically so Cerato owners don’t have to measure arms or memorise blade codes to get this right. Enter your model and year, and the tool matches you to the correct hybrid or beam blade with the right connector already sorted, backed by a fitment guarantee, a 30-day money-back policy, and a 12-month warranty on every set.
That combination matters more than it sounds. A wrong-size blade doesn’t just underperform, it can chatter, skip patches of glass, or fail to seat properly against the connector, and returns cost you time you don’t want to spend twice. Com’s Cerato range covers both blade styles discussed in this guide, built from natural rubber with segmented pressure distribution to handle everything from a dry, dusty highway run to a sudden downpour. If your household runs more than one Kia, the same selector works just as well for a Picanto or a Niro.
Head to the Kia Cerato wiper blade page, enter your details, and get a fitment-guaranteed pair shipped free anywhere in the country.
Sources
- Hybrid wiper blades fit Kia Cerato BD 2018 - 2024, Twin Kit – Acatana
FAQ
What is the wiper size for a Kia Cerato?
For the BD generation built from 2018 to 2025, the front blades are 650 mm (26 in) on the driver’s side and 400 mm (16 in) on the passenger side, with a 350 mm (14 in) rear blade on models fitted with one.
What is the wiper size for a 2017 Kia Cerato?
The Cerato before the BD generation typically uses different front blade lengths. Confirm the exact size for your model year through a vehicle selector or your owner’s manual rather than assuming BD sizing applies.
Can I use 24 inch instead of 22 inch wiper blades?
No. Wiper length is set by the arm’s sweep radius, and fitting an oversized blade can cause it to strike the windscreen frame, mirror housing, or bonnet edge at full extension. Always order the exact length specified for your vehicle rather than the next size up.
What is the size of the wiper blades on a 2015 Kia Cerato?
Models before the 2018 BD generation run different blade dimensions than those detailed in this guide. Check your specific size using a vehicle selector tool or by measuring the rubber edge tip-to-tip before ordering.